Wonderful 1WP10N-TI

Swimming and pool use are the settings the waterproof construction is intended for, subject to stated conditions of exposure.

Beach and sea use raises salt exposure, which makes the washing and drying procedure central to service life.

Showering and bathroom use is supported by a foot that tolerates water and a sole finished for wet floors.

Poolsides, changing rooms and wet tiled areas are where the non-slip sole contributes most directly to safety.

Heavier users are served by the titanium adapter variant, where the higher rating is required.

Weight-sensitive builds benefit from titanium at the distal end, where mass is accelerated through every swing.

Users who would otherwise need a separate limb for water may be served by a single foot, where the prosthetist judges that appropriate.

The Rating Decided by the Adapter

Adapter material governs how much load the connection carries, which is the number that usually limits the assembly.

A Choice Between Two Materials

Stainless carries substantial load with good corrosion behaviour; titanium raises the rating further and reduces mass.

Mass Considered at the Distal End

Titanium keeps weight down where it is accelerated through every swing phase.

A Barrier Against Ingress

A waterproof nylon sleeve encloses the components, keeping water from what sits inside.

Washed Out Rather Than Sealed In

Sleeve and components are removable, so chlorine, salt and soap can be flushed and the interior dried.

Grip Where No Shoe Intervenes

A textured sole addresses the surfaces a wet-use foot actually meets.

No Joint to Admit Grit

Solid ankle construction leaves no bumpers or pivot for water and grit to enter.

Heel Function Without a Joint

A compressible wedge gives the effect of plantar flexion at heel strike, with a rigid keel carrying midstance.

One Assembly for Wet and Dry

A user may be able to avoid a second limb, where the prosthetist judges that appropriate.

Variants Compared in One Place

A buyer sees the adapter options against each other rather than across separate listings.

Supply and Documentation Arranged

Medigear.uk can arrange supply, documentation and the provision of consumables.

Waterproof Solid Ankle Cushion Heel Foot

A non-articulating foot enclosed in a waterproof sleeve with a textured non-slip sole.

Reference Family: 1WP10 and 1WP10N

With SS and TI suffixes denoting the supplied adapter material, to be confirmed.

Manufacturer

Wonderful Rehabilitation, to be confirmed at quotation.

Adapter Material Options

Stainless steel and titanium, with the rating for each confirmed at quotation.

Weight Rating by Adapter

Confirmed at quotation, as the adapter governs the connection rating.

Waterproof Nylon Sleeve

Enclosing the components, described as removable and washable.

Detachable Components

Described as designed to come apart for cleaning and maintenance.

Textured Non-Slip Sole

For wet floors, poolsides and decks.

Cushion Heel

A compressible wedge producing the effect of plantar flexion at heel contact.

Keel and Footplate

Published variously as polyurethane, a plastic core and a carbon fibre footplate, to be confirmed.

Size Range

Published inconsistently across the family, to be confirmed for the reference supplied.

Product Weight

Published inconsistently, to be confirmed.

Maximum Body Weight

Published at 100 kg and 110 kg, to be confirmed per size and adapter.

Handing

Left or right, specified at order.

Fitting Tool

Shown alongside the foot in the product photographs, with supply confirmed at quotation.

Permitted Water Exposure

Fresh, salt and chlorinated water, confirmed at quotation.

Drying and Care Procedure

Provided by the seller at quotation.

UKCA or CE Marking and Declaration of Conformity

Issued by the manufacturer and requested from the seller at quotation, with published claims evidenced.

Instructions for Use

Provided by the seller at quotation, and required before fitting.

The 1WP10 range is a family of waterproof solid ankle cushion heel feet with non-slip soles, supplied with a foot adapter, and the adapter is the part of the package most easily overlooked. A prosthetic foot is rarely the limiting component in an assembly, since the moulding and its keel are substantial and what governs load is usually the metal fitting at the top, and published adapters differ considerably by material for identical geometry. Across this range the choice is between stainless steel, which brings corrosion resistance suited to a wet-use foot and carries substantial load, and titanium, which raises the rating further while reducing mass at the distal end where weight is accelerated through every swing. Beneath that sits a foot built for water: a nylon sleeve keeping water from the components, sleeve and components removable so salt, chlorine and soap can be washed out and the interior dried, a textured sole for the unshod surfaces such a foot actually meets, and a solid ankle leaving no joint for grit to enter. Selection of size, handing and adapter material is the work of the prescribing prosthetist. Sizing, ratings, keel construction and permitted exposure are provided by the seller at quotation alongside UKCA or CE documentation. Medigear.uk lists the range for UK business buyers and can arrange supply, documentation and the provision of consumables. Enquire for a written quotation.