Wonderful 2F8=M10SS

Modular transtibial and transfemoral builds use a foot adapter at the connection between foot and pylon.

Limbs used around water are served by a material chosen for repeated wetting and drying at the lowest point of the build.

Coastal and pool environments involve chloride exposure specifically, which is where stainless grade matters.

Winter walking exposes the adapter to road salt, which reaches floor-level components first.

Outdoor and occupational users whose walking takes them through wet and dirty conditions place the highest demand on this position.

Heavier users are served by a material carrying more load than a light alloy of the same geometry, within the rating confirmed.

Clinics holding stock in more than one material can match the adapter to the user's weight, activity and environment at specification.

Material Chosen for the Position

The adapter sits closer to the ground than any other structural fitting, and stainless steel is selected for that exposure.

A Surface That Repairs Itself

Corrosion resistance comes from a passive oxide layer that reforms when damaged, which suits repeated wetting and drying.

Suited to Water That Does Not Drain

Water reaching a foot recess sits rather than running off, and a fitting inside that recess spends time in contact with it.

Load Capacity From the Material

Stainless carries more load than a light alloy of the same geometry, which widens the range of users it suits.

Alignment Set and Locked

Set screws at the proximal face allow angular adjustment to be established and held through bench and dynamic alignment.

Seating Into the Foot Recess

The adapter body seats into the moulded cavity, spreading clamping load across the foot material.

Grade Established Before Order

Stainless grades differ in chloride tolerance, so the grade and permitted exposure both come from the manufacturer.

Torque Taken From the Instructions

Figures for the foot bolt and any set screws come from this product's documentation rather than from practice elsewhere.

Rating Confirmed for This Reference

Figures published against sibling references are not carried across, so the weight limit is established for the item supplied.

Reference Stated Unambiguously

The manufacturer is named clearly, so a reference close to others in the market is not confused at order.

Supply and Documentation Arranged

Medigear.uk can arrange supply, documentation and the provision of consumables.

Machined Stainless Steel Foot Adapter

Connecting a prosthetic foot to the pylon or distal fitting of a modular prosthesis.

Item Reference: 2F8=M10SS

To be confirmed against the manufacturer's marking and distinguished from similar references.

Manufacturer

Wonderful Rehabilitation, to be confirmed at quotation.

Material

Stainless steel, with the grade to be confirmed.

Thread: M10

Per the reference designation, with pitch to be confirmed.

Maximum Body Weight

Confirmed at quotation for this reference.

Product Weight

Confirmed at quotation.

Adapter Height

Confirmed at quotation, as it contributes to build height.

Proximal Connection

Pyramid, receiver or flat face, confirmed at quotation.

Set Screw Arrangement

Screw size, positions and tightening torque confirmed at quotation.

Compatible Feet and Recess Geometry

Confirmed at quotation.

Fixing Method

Bolted, with any bonding requirement confirmed at quotation.

Foot Bolt

Supplied or ordered separately, confirmed at quotation.

Corrosion Performance

Permitted exposure confirmed at quotation, covering fresh, salt and chlorinated water.

Tightening Torque

Confirmed at quotation from the manufacturer's instructions.

UKCA or CE Marking and Declaration of Conformity

Issued by the manufacturer and requested from the seller at quotation.

Instructions for Use

Provided by the seller at quotation, and required before fitting.

Warranty Terms

Set by the seller at quotation.

This is a machined stainless steel foot adapter, joining a prosthetic foot to the pylon or distal connection above it. Position determines exposure in a prosthesis, and this fitting sits closer to the ground than any other structural component: puddles, wet grass, winter road salt, sand and seawater, chlorinated water and the film of grit that collects at floor level all reach it first, and water entering a foot recess sits there rather than draining away. Stainless steel answers that through a passive oxide layer that reforms when the surface is damaged, which is what allows repeated wetting and drying without progressive degradation, and it carries more load than a light alloy of the same geometry. What it costs is mass at the distal end of the limb, where weight is accelerated through every swing, so material is chosen against the individual rather than as a default. Mechanically the adapter seats into the foot recess, carries the thread the bolt engages, and provides the connection at which bench, static and dynamic alignment are set and locked. Grade, rating and torque should all come from the manufacturer's documentation. Selection, fitting and alignment are the work of the prescribing prosthetist. Those details are provided by the seller at quotation alongside UKCA or CE documentation. Medigear.uk lists the adapter for UK business buyers and can arrange supply, documentation and the provision of consumables. Enquire for a written quotation.